nixos-config/hosts/default/configuration.nix

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, inputs, ... }:

{
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
      inputs.home-manager.nixosModules.default
      ./main-user.nix
    ];

  fileSystems."/mnt" =
    { device = "/dev/mapper/volgrp-root";
      fsType = "btrfs";
      options = [ "subvol=5" ];
    };

  fileSystems."/mnt/home" =
    { device = "/dev/mapper/volgrp-home";
      fsType = "btrfs";
      options = [ "subvol=5" ];
    };
  boot.initrd.luks.devices."nvme0n1p2_crypt".device = "/dev/disk/by-uuid/93922f23-d0ba-4405-adbb-9789d37e5985";
  boot.initrd.luks.devices."nvme2n1p2_oldcrypt".device = "/dev/disk/by-uuid/44235dca-99e8-4ea8-9516-97d9f5a2d702";


  # Add flakes
  nix.settings.experimental-features = [ "nix-command" "flakes" ];

  # Feel like I should be sure this is safe w/flakes first:
  #system.autoUpgrade.enable = true;

  # Bootloader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;

  # System name
  networking.hostName = "supercell"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  # Enable networking
  networking.networkmanager.enable = true;

  # Set your time zone.
  time.timeZone = "America/New_York";

  # Select internationalisation properties.
  i18n.defaultLocale = "en_US.UTF-8";

  i18n.extraLocaleSettings = {
    LC_ADDRESS = "en_US.UTF-8";
    LC_IDENTIFICATION = "en_US.UTF-8";
    LC_MEASUREMENT = "en_US.UTF-8";
    LC_MONETARY = "en_US.UTF-8";
    LC_NAME = "en_US.UTF-8";
    LC_NUMERIC = "en_US.UTF-8";
    LC_PAPER = "en_US.UTF-8";
    LC_TELEPHONE = "en_US.UTF-8";
    LC_TIME = "en_US.UTF-8";
  };

  # Enable the X11 windowing system.
  # You can disable this if you're only using the Wayland session.
  # services.xserver.enable = true;

  # Enable the KDE Plasma Desktop Environment.
  services.displayManager.sddm.enable = true;
  services.displayManager.sddm.wayland.enable = true;
  services.desktopManager.plasma6.enable = true;

  # Configure keymap in X11 (presumably, XWayland uses something different?)
  #services.xserver.xkb = {
  #  layout = "us";
  #  variant = "";
  #};

  # Enable CUPS to print documents.
  # services.printing.enable = true;

  # Enable sound with pipewire.
  hardware.pulseaudio.enable = false;
  security.rtkit.enable = true;
  services.pipewire = {
    enable = true;
    alsa.enable = true;
    alsa.support32Bit = true;
    pulse.enable = true;
    # If you want to use JACK applications, uncomment this
    #jack.enable = true;

    # use the example session manager (no others are packaged yet so this is enabled by default,
    # no need to redefine it in your config for now)
    #media-session.enable = true;
  };

  # Enable touchpad support (enabled default in most desktopManager).
  # services.xserver.libinput.enable = true;
  # Define a user account. Don't forget to set a password with ‘passwd’.
  # Pull defaults from main-user:
  main-user.enable = true;
  main-user.userName = "wolcen";
  # And system-specific settings:
  users.users.wolcen = {
    description = "Chris Thompson";
    openssh.authorizedKeys.keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEdxdKYrlwOolJpYxvWu6gW/60pzT6aKN6JHhnTSBFqN wolcen@typhoon" ];
    extraGroups = [ "networkmanager" "wheel" ];
  };

  home-manager = {
    extraSpecialArgs = { inherit inputs; };
    users = {
      "wolcen" = import ./home.nix;
    };
  };
  
  # Install firefox.
  programs.firefox.enable = true;
  # Add docker!
  virtualisation.docker.enable = true;
  virtualisation.docker.storageDriver = "btrfs"; # Only when using BTRFS! (wolcen approved!)
  # Required for DDEV to add hosts files, if your DNS will not resolve addresses to localhost. 
  environment.etc.hosts.mode = "0644";
  # Allow unfree packages
  nixpkgs.config.allowUnfree = true;

  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [
    neovim
    wget
    curl
    tmux
    whois
    git
    wl-clipboard-rs
    dogdns
    bat
    nix-search-cli
    lsof
  ];

  nixpkgs.config.permittedInsecurePackages = [
    "electron-27.3.11"
  ];

  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  # programs.mtr.enable = true;
  # programs.gnupg.agent = {
  #   enable = true;
  #   enableSSHSupport = true;
  # };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  services.openssh.enable = true;

  # RX 6700 XT setup
  hardware.graphics.extraPackages = [
    pkgs.rocmPackages.clr.icd
    pkgs.amdvlk
    pkgs.libva
  ];
  # To enable Vulkan support for 32-bit applications, also add:
  hardware.graphics.extraPackages32 = [
    pkgs.driversi686Linux.amdvlk
  ];
    
  # Force radv
  environment.variables.AMD_VULKAN_ICD = "RADV";
  # Or
  #environment.variables.VK_ICD_FILENAMES =
  #	"/run/opengl-driver/share/vulkan/icd.d/radeon_icd.x86_64.json";

  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It‘s perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "24.05"; # Did you read the comment?

}