Add lsof/nix-search-cli

\

@@ -0,0 +1,197 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, inputs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      inputs.home-manager.nixosModules.default
+      ./main-user.nix
+    ];
+
+  fileSystems."/mnt" =
+    { device = "/dev/mapper/volgrp-root";
+      fsType = "btrfs";
+      options = [ "subvol=5" ];
+    };
+
+  fileSystems."/mnt/home" =
+    { device = "/dev/mapper/volgrp-home";
+      fsType = "btrfs";
+      options = [ "subvol=5" ];
+    };
+  boot.initrd.luks.devices."nvme0n1p2_crypt".device = "/dev/disk/by-uuid/93922f23-d0ba-4405-adbb-9789d37e5985";
+  boot.initrd.luks.devices."nvme2n1p2_oldcrypt".device = "/dev/disk/by-uuid/44235dca-99e8-4ea8-9516-97d9f5a2d702";
+
+
+  # Add flakes
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+  # Feel like I should be sure this is safe w/flakes first:
+  #system.autoUpgrade.enable = true;
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  # System name
+  networking.hostName = "supercell"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/New_York";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  # Enable the X11 windowing system.
+  # You can disable this if you're only using the Wayland session.
+  # services.xserver.enable = true;
+
+  # Enable the KDE Plasma Desktop Environment.
+  services.displayManager.sddm.enable = true;
+  services.displayManager.sddm.wayland.enable = true;
+  services.desktopManager.plasma6.enable = true;
+
+  # Configure keymap in X11 (presumably, XWayland uses something different?)
+  #services.xserver.xkb = {
+  #  layout = "us";
+  #  variant = "";
+  #};
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  # Pull defaults from main-user:
+  main-user.enable = true;
+  main-user.userName = "wolcen";
+  # And system-specific settings:
+  users.users.wolcen = {
+    description = "Chris Thompson";
+    openssh.authorizedKeys.keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEdxdKYrlwOolJpYxvWu6gW/60pzT6aKN6JHhnTSBFqN wolcen@typhoon" ];
+    extraGroups = [ "networkmanager" "wheel" ];
+  };
+
+  home-manager = {
+    extraSpecialArgs = { inherit inputs; };
+    users = {
+      "wolcen" = import ./home.nix;
+    };
+  };
+  
+  # Install firefox.
+  programs.firefox.enable = true;
+  # Add docker!
+  virtualisation.docker.enable = true;
+  virtualisation.docker.storageDriver = "btrfs"; # Only when using BTRFS! (wolcen approved!)
+  # Required for DDEV to add hosts files, if your DNS will not resolve addresses to localhost. 
+  environment.etc.hosts.mode = "0644";
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    neovim
+    wget
+    curl
+    tmux
+    whois
+    git
+    wl-clipboard-rs
+    dogdns
+    bat
+    nix-search-cli
+    lsof
+  ];
+
+  nixpkgs.config.permittedInsecurePackages = [
+    "electron-27.3.11"
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # RX 6700 XT setup
+  hardware.graphics.extraPackages = [
+    pkgs.rocmPackages.clr.icd
+    pkgs.amdvlk
+    pkgs.libva
+  ];
+  # To enable Vulkan support for 32-bit applications, also add:
+  hardware.graphics.extraPackages32 = [
+    pkgs.driversi686Linux.amdvlk
+  ];
+    
+  # Force radv
+  environment.variables.AMD_VULKAN_ICD = "RADV";
+  # Or
+  #environment.variables.VK_ICD_FILENAMES =
+  #	"/run/opengl-driver/share/vulkan/icd.d/radeon_icd.x86_64.json";
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.05"; # Did you read the comment?
+
+}

hosts/default/configuration.nix

@@ -11,12 +11,33 @@
       inputs.home-manager.nixosModules.default
       ./main-user.nix
     ];
+
+  fileSystems."/mnt" =
+    { device = "/dev/mapper/volgrp-root";
+      fsType = "btrfs";
+      options = [ "subvol=5" ];
+    };
+
+  fileSystems."/mnt/home" =
+    { device = "/dev/mapper/volgrp-home";
+      fsType = "btrfs";
+      options = [ "subvol=5" ];
+    };
+  boot.initrd.luks.devices."nvme0n1p2_crypt".device = "/dev/disk/by-uuid/93922f23-d0ba-4405-adbb-9789d37e5985";
+  boot.initrd.luks.devices."nvme2n1p2_oldcrypt".device = "/dev/disk/by-uuid/44235dca-99e8-4ea8-9516-97d9f5a2d702";
+
+
   # Add flakes
   nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+  # Feel like I should be sure this is safe w/flakes first:
+  #system.autoUpgrade.enable = true;
+
   # Bootloader.
   boot.loader.systemd-boot.enable = true;
   boot.loader.efi.canTouchEfiVariables = true;
 
+  # System name
   networking.hostName = "supercell"; # Define your hostname.
   # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
 
@@ -121,6 +142,8 @@
     wl-clipboard-rs
     dogdns
     bat
+    nix-search-cli
+    lsof
   ];
 
   nixpkgs.config.permittedInsecurePackages = [