31dom/05.md

Using constants and pseudofields as data placeholders in the Drupal migration process pipeline

So far we have learned how to write basic Drupal migrations and use process plugins to transform data to meet the format expected by the destination. In the previous chapter we learned one of many approaches to migrating images. Now we will change it a bit to introduce two new migration concepts: constants and pseudofields. Both can be used as data placeholders in the migration timeline. Along with other process plugins, they allow you to build dynamic values that can be used as part of the migrate process pipeline.

Setting and using source constants

In the Migrate API, constant are arbitrary values that can be used later in the process pipeline. They are set as direct children of the source section. You write a constants key whose value is a list of name-value pairs. Even though they are defined in the source section, they are independent of the particular source plugin in use. The following code snippet shows a generalization for settings and using constants:

source:
  constants:
    MY_STRING: "http://understanddrupal.com"
    MY_INTEGER: 31
    MY_DECIMAL: 3.1415927
    MY_ARRAY:
      - "dinarcon"
      - "dinartecc"
  plugin: source_plugin_name
  source_plugin_config_1: source_config_value_1
  source_plugin_config_2: source_config_value_2
process:
  process_destination_1: constants/MY_INTEGER
  process_destination_2:
    plugin: concat
    source: constants/MY_ARRAY
    delimiter: " "

You can set as many constants as you need. Although not required by the API, it is a common convention to write the constant names in all uppercase and using underscores (_) to separate words. The value can be set to anything you need to use later. In the example above, there are strings, integers, decimals, and arrays. To use a constant in the process section you type its name, just like any other column provided by the source plugin. Note that you use the constant you need to name the full hierarchy under the source section. That is, the word constants and the name itself separated by a slash (/) symbol. They can be used to copy their value directly to the destination or as part of any process plugin configuration.

Technical note: The word constants for storing the values in the source section is not special. You can use any word you want as long as it does not collide with another configuration key of your particular source plugin. A reason to use a different name is that your source actually contains a column named constants. In that case you could use defaults or something else. The one restriction is that whatever value you use, you have to use it in the process section to refer to any constant. For example:

source:
  defaults:
    MY_VALUE: "http://understanddrupal.com"
  plugin: source_plugin_name
  source_plugin_config: source_config_value
process:
  process_destination: defaults/MY_VALUE

Setting and using pseudofields

Similar to constants, pseudofields store arbitrary values for use later in the process pipeline. There are some key differences. Pseudofields are set in the process section. The name can be arbitrary as long as it does not conflict with a property name or field name in the destination. The value can be set to a verbatim copy from the source (a column or a constant) or they can use process plugins for data transformations. The following code snippet shows a generalization for settings and using pseudofields:

source:
  constants:
    MY_BASE_URL: "http://understanddrupal.com"
  plugin: source_plugin_name
  source_plugin_config_1: source_config_value_1
  source_plugin_config_2: source_config_value_2
process:
  title: source_column_title
  my_pseudofield_1:
    plugin: concat
    source:
      - constants/MY_BASE_URL
      - source_column_relative_url
    delimiter: "/"
  my_pseudofield_2:
    plugin: urlencode
    source: "@my_pseudofield_1"
  field_link/uri: "@my_pseudofield_2"
  field_link/title: "@title"

In the above example, my_pseudofield_1 is set to the result of a concat process transformation that joins a constant and a column from the source section. The result value is later used as part of a urlencode process transformation. Note that to use the value from my_pseudofield_1 you have to enclose it in quotes (') and prepend an at sign (@) to the name. The pseudo_ prefix in the name is not required. In this case it is used to make it easier to distinguish among pseudofields and regular property or field names. The new value obtained from URL encode operation is stored in my_pseudofield_2. This last pseudofield is used to set the value of the uri subfield for field_link. The example could be simplified, for example, by using a single pseudofield and chaining process plugins. It is presented that way to demonstrate that a pseudofield could be used as direct assignments or as part of process plugin configuration values.

Technical note: If the name of the subfield can be arbitrary, how can you prevent name clashes with destination property names and field names? You might have to look at the source for the entity and the configuration of the bundle. In the case of a node migration, look at the baseFieldDefinitions method of the Node class for a list of property names. Be mindful of class inheritance and method overriding. For a list of fields and their machine names, look at the "Manage fields" section of the content type you are migrating into. The Field API prefixes any field created via the administration interface with the string field_. This reduces the likelihood of name clashes. Other than these two name restrictions, anything else can be used. In this case, the Migrate API will eventually perform an entity save operation which will discard the pseudofields.

Understanding Drupal Migrate API process pipeline

The migrate process pipeline is a mechanism by which the value of any destination property, field, or pseudofield that has been set can be used by anything defined later in the process section. The fact that using a pseudofield requires enclosing its name in quotes and prepending an at sign is actually a requirement of the process pipeline. Let’s see some examples using a node migration:

• To use the title property of the node entity, you would write @title
• To use the field_body field of the Basic page content type, you would write @field_body
• To use the my_temp_value pseudofield, you would write @my_temp_value

In the process pipeline, these values can be used just like constants and columns from the source. The only restriction is that they need to be set before being used. For those familiar with the "rewrite results" feature of Views, it follows the same idea. You have access to everything defined previously. Anytime you use enclose a name in quotes and prepend it with an at sign, you are telling the migrate API to look for that element in the process section instead of the source section.

Migrating images using the image_import plugin

Let’s practice the concepts of constants, pseudofields, and the migrate process pipeline by modifying the example of the previous entry. The Migrate Files module provides another process plugin named image_import that allows you to directly set all the subfield values in the plugin configuration itself.

As in previous examples, we will create a new module and write a migration definition file to perform the migration. It is assumed that Drupal was installed using the standard installation profile. The code snippets will be compact to focus on particular elements of the migration. The full code is available at https://github.com/dinarcon/ud_migrations The module name is UD Migration constants and pseudofields and its machine name is ud_migrations_constants_pseudofields. The id of the example migration is udm_constants_pseudofields. Make sure to download and enable the Migrate Files module. Otherwise, you will get an error like: "In DiscoveryTrait.php line 53: The "image_import" plugin does not exist. Valid plugin IDs for Drupal\migrate\Plugin\MigratePluginManager are:...".

Let’s see part of the source definition:

source:
  constants:
    BASE_URL: "https://udrupal.com"
    PHOTO_DESCRIPTION_PREFIX: "Photo of"
  plugin: embedded_data
  data_rows:
    - unique_id: 1
      name: "Michele Metts"
      photo_url: "photos/freescholar.jpg"
      photo_width: "587"
      photo_height: "657"

Only one record is presented to keep snippet short, but more exist. In addition to having a unique identifier, each record includes a name, a short profile, and details about the image. Note that this time, the photo_url does not provide an absolute URL. Instead, it is a relative path from the domain hosting the images. In this example, the domain is https://udrupal.com so that value is stored in the BASE_URL constant which is later used to assemble a valid absolute URL to the image. Also, there is no photo description, but one can be created by concatenating some strings. The PHOTO_DESCRIPTION_PREFIX constant stores the prefix to add to the name to create a photo description.

Now, let’s see the process definition:

process:
  title: name
  pseudo_image_url:
    plugin: concat
    source:
      - constants/BASE_URL
      - photo_url
    delimiter: "/"
  pseudo_image_description:
    plugin: concat
    source:
      - constants/PHOTO_DESCRIPTION_PREFIX
      - name
    delimiter: " "
  field_image:
    plugin: image_import
    source: "@pseudo_image_url"
    reuse: TRUE
    alt: "@pseudo_image_description"
    title: "@title"
    width: photo_width
    height: photo_height

The title node property is set directly to the value of the name column from the source. Then, two pseudofields. pseudo_image_url stores a valid absolute URL to the image using the BASE_URL constant and the photo_url column from the source. pseudo_image_description uses the PHOTO_DESCRIPTION_PREFIX constant and the name column from the source to store a description for the image.

For the field_image field, the image_import process plugin is used. This time, the subfields are not set manually like in the previous chapter. The absence of the id_only configuration key, allows you to assign values to subfields simply by configuring the image_import plugin. The URL to the image is set in the source key and uses the pseudo_image_url pseudofield. The alt key allows you to set the alternative attribute for the image and in this case the pseudo_image_description pseudofield is used. For the title subfield sets the text of a subfield with the same name and in this case it is assigned the value of the title node property which was set at the beginning of the process pipeline. Remember that not only psedufields are available. Finally, the width and height configuration uses the columns from the source to set the values of the corresponding subfields.